煤油共炼残渣性质分析

采用元素分析、工业分析、热重、X射线衍射、扫描电镜、红外光谱等手段对煤油共炼残渣的组成、微观结构、官能团进行分析表征，并通过红外谱图的分峰拟合对官能团含量进行半定量计算。结果表明：残渣的有机物由具有片层堆积结构碳质颗粒组成，无机物由煤油共炼催化剂和煤中的无机矿物质组成；残渣颗粒粒径呈10 μm和2 μm的两级分布，颗粒呈整体无序、局部有序的分布状态。分别采用工业分析和热重分析得到挥发分、固定碳和灰分的含量，两组数据一致：残渣的氢键中羟基自缔合结构占到了47.95%；脂肪氢中亚甲基结构占64%左右；含氧官能团主要以碳氧键和羰基形式存在，含有微量的硅氧键，没有羧基；芳香结构中烷基侧链取代基较多，五取代氢的芳香结构只占约4.5%。     

一种酰胺类沥青乳化剂的制备及性能研究

首先通过脂肪酸与酸酐反应，得到多元羧酸中间体，再将其与改性多乙烯多胺经过一系列反应合成一种酰胺类沥青乳化剂，采用傅里叶红外光谱对乳化剂结构进行表征。实验室对比测试了自制乳化剂与进口乳化剂的表面活性及其所制乳化沥青的性能。结果表明：两种乳化剂制备乳化沥青的各项性能指标均可满足微表处施工技术要求，且自制乳化剂具有较高的固含量和较好的储存稳定性，乳化沥青8 min即可破乳，用于微表处养护可快速开放交通；自制乳化剂价格仅为进口乳化剂的76.4%左右，应用前景良好。     

Feasibility study to control fiber distribution for enhancement of composite properties via three-dimensional printing

The distribution of fibers in the composite (which takes into account both their locations and orientations) is one of the important factors that affect the mechanical properties of FRCs. However, this parameter depends on various factors during composite fabrication, and controlling the distribution of fibers in the produced material represents a significant challenge. In this study, the applicability of three-dimensional (3D) printing technique for controlling fiber distributions was evaluated. The fibers fabricated using a 3D printer were placed inside a mold to produce cementitious composites. Three-point bending tests were conducted and the results of the experiment were discussed.     

Progress in pressureless sintering of boron carbide ceramics – a review

ABSTRACT

Boron carbide (B₄C) ceramics has many outstanding performance, such as extremely high hardness, low density, high melting point, high elastic modulus, high thermoelectromotive force, high chemical resistance, high neutron absorption cross section, high impact and excellent wear resistance. Therefore, B₄C ceramics can be used in various industrial applications, such as lightweight ceramic armour, high temperature thermocouples, neutron absorber, reactor control rods in nuclear power engineering, polishing media for hard materials, abrasive media for lapping and grinding, and wear resistant components (blasting nozzles, die tips and grinding wheels). Pressureless sintering is the method with industrialised application value for B₄C ceramics, however, it is impossible to sinter pure B₄C ceramics to high densities without additives by pressureless sintering. So sintering additives must be used to promote the densification of B₄C ceramics. The different sintering additives used to promote the densification of boron carbide will be described in this review, including carbon additives, metallic additives, oxide additives, non-oxide additives, combined additives and rare earth oxide additives. Finally, the recent research trends for sintering methods and sintering additives of B₄C ceramics will also be proposed.     

Extended vertical lists for temporal pattern mining from multivariate time series

In this paper, the problem of mining complex temporal patterns in the context of multivariate time series is considered. A new method called the Fast Temporal Pattern Mining with Extended Vertical Lists is introduced. The method is based on an extension of the level‐wise property, which requires a more complex pattern to start at positions within a record where all of the subpatterns of the pattern start. The approach is built around a novel data structure called the Extended Vertical List that tracks positions of the first state of the pattern inside records and links them to appropriate positions of a specific subpattern of the pattern called the prefix. Extensive computational results indicate that the new method performs significantly faster than the previous version of the algorithm for Temporal Pattern Mining; however, the increase in speed comes at the expense of increased memory usage.     

Fluidizing effects of polymers with various anchoring groups in cement pastes and their sensitivity to environmental temperatures

We synthesized various polymers with different functional groups of ─COO⁻, ─SO₃⁻, and ≡N⁺─ to study the impact of the environmental temperature (25, 50, and 80 °C) on the dispersing capability by measuring the fluidity of fresh cement paste, total organic carbon, ζ potential, and isothermal calorimetry. The results show that no adsorption was observed for the cement pastes containing acrylic acid, 2-acrylamido-2-methyl propane sulfonic acid, and [3-(methacryloylamino)propyl] trimethyl ammonium chloride, probably because of the trace amount of adsorption, whereas the fluidity of the pastes was indeed improved by the addition of these chemicals. Generally, for the polymers containing various functional groups, the adsorption capability was in the order ─COO⁻ > ─SO₃⁻ > ≡N⁺─. The dispersing capability for the carboxylate superplasticizer was robust to the change in the temperature, whereas it was dramatically weakened by the increase in temperature for sulfonate superplasticizer, although the adsorption amount increased along with the temperature rise. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47494.     

工业硝酸铵添加剂对乳胶基质的影响

为了改善工业硝酸铵的吸湿结块性能,通常会加入添加剂(有机包覆剂或无机改性剂),而工业硝酸铵作为乳化炸药的主要原料,其添加剂对乳化炸药的制备和性能会产生影响。因此,分别对采用有机包覆剂蜡的泰国产工业硝酸铵和采用无机改性剂的俄罗斯产工业硝酸铵,开展了制备现场散装乳胶基质的工业试验。结果表明:两类工业硝酸铵均可作为乳化炸药原材料使用,但有机包覆剂会沉入水相罐底部或粘附在输送管道内壁,对水相和乳胶基质制备造成不利影响,因此需要在水相制备环节分离去除包覆剂蜡;硝酸镁、硝酸钙等无机改性剂对乳胶基质制备无影响,但生产的乳胶基质稳定性较差,通过调整乳化剂的种类和配比以及乳化器的转速可得到一定改进。     

纸基底印刷无芯片RFID湿度传感器* .txt

摘要：提出了一种基于纸基底的喷墨印刷无芯片RFID湿度传感器，通过遗传算法与射频仿真软件HFSS相结合，对常规开口环谐振器结构进行分布式加载，得到目标频率为245 GHz的谐振特性良好的传感器模型；采用DMP3000型材料打印机，在不同纸基底上喷墨印刷银墨水制作传感器，以纸张本身的吸水性实现湿度传感；研究不同纸基底对湿度传感器感湿灵敏度和恢复度的影响。结果表明，柯达相纸传感器的灵敏度最高，高湿灵敏度可达到8 MHz%RH，双铜纸湿度传感器恢复度高且恢复时间短，仅为2 min；两种基底湿度传感器皆有较好的一致性、中长期稳定性，且湿敏特性在20℃～30℃范围内受温度影响较小。对纸基湿度传感器的感湿机理进行了分析，纸主要成分纤维素表面的羟基与吸附的水分子作用形成氢键，改变了基底的介电参数，传感器的湿敏特性与纸的成分和结构有关。 .txt     

Physicochemical,textural and volatile characteristics of fermented milk co-cultured with Streptococcus thermophilus,Bifidobacterium animalis or Lactobacillus plantarum

Fermented milks were prepared with various culture combinations of Lactobacillus plantarum or Bifidobacterium animalis with Streptococcus thermophilus, and the impact of microbes combinations on acidification, proteolysis, lipolysis, texture, volatiles and sensory quality of fermented milk was investigated during 21-day storage at 4 °C. The results showed that products from the co-cultures displayed higher titratable acidity, more peptides, higher proteolytic activity and lipolysis capacity compared with that from the pure strains of S. thermophilus. When L. plantarum and B. animalis combined in a ratio of 2:1 with S. thermophilus, the products maintained relatively more viable cell counts of the 3 strains, strong proteolysis ability and lipolysis capacity during the storage. Milk fermented by co-cultures of the 3 strains exhibited higher cohesiveness, more volatiles and better sensory quality compared with these fermented by S. thermophilus only or in co-cultures with either B. animalis or L. plantarum based on principal component analysis.